Why do we need solar cables
There are many environmental problems because of the waste of natural resources instead of taking care of the nature, the earth becomes dry, and human beings seek ways to find alternative ways, alternative electric energy has been discovered and called solar energy, the solar photovoltaic industry is gradually receiving more and more attention, in their price drops and many people think that solar energy is a power to replace their office or house. They found it cheap, clean and reliable. Against the backdrop of growing interest in solar energy, demand for solar cables consisting of tinned copper, 1.5mm, 2.5mm, 4.0mm, etc., is expected to increase. Solar cable is the transmission medium of solar power generation. They are nature-friendly and much safer than previous products. They're hooking up solar panels.
The benefits of solar cables
In addition to being nature-friendly, solar cables have many benefits, and they stand out from other cables by being able to last about 30 years regardless of weather conditions, temperature and ozone resistance. Solar cables protect against UV rays. It is characterized by low smoke emissions, low toxicity, and corrosive in fires. Solar cables can withstand flames and fires, they can be easily installed, and they can be recycled without problem, as modern environmental regulations require. Their different colors allow them to be quickly identified.
Solar cable production process
Solar cable is made of tinned copper, solar cable 4.0mm, 6.0mm, 16.0mm, solar cable crosslinking polyolefin compound and zero halogen polyolefin compound. All of this should be envisaged to produce naturally friendly so-called green energy cables. When produced, they should have the following characteristics: weather resistance, mineral oil and acid and alkali resistance. Its conductor, the highest temperature should be 120 ℃ ͦ, 20, 000 hours operation, the minimum temperature should be - 40 ͦ ℃. In terms of electrical characteristics, the following conditions should be met: rated voltage 1.5 (1.8)KV DC / 0.6/1.0 (1.2)KV AC, high 6.5 KV DC for 5 minutes.
The solar cable should also be resistant to impact, wear and tear, and its minimum bending radius should not be more than 4 times of the total diameter. It features its safety pull -50 n/sq mm. The insulation of cables must withstand thermal and mechanical loads, so crosslinked plastics are increasingly used today, they can not only withstand harsh weather conditions and are suitable for outdoor use, but they are also resistant to salt water, and thanks to halogen-free flame retardant crosslinked sheathing materials, they can be used indoors in dry conditions.
To sum up, solar energy and its main source solar cable are very safe, durable, resistant to environmental impacts and very reliable. What's more, they do not harm the environment, nor do they have to worry about power outages or other problems, which most people face during the power supply. In any case, the house or office will have a guaranteed current, they will not be interrupted in the work, no time wasted, not too much money spent, no dangerous smoke emissions in their work cause so much damage to heat and nature.
Post time: Nov-23-2022